What should be paid attention to in normal and construction of stainless steel pipe fittings?

1. When storing or placing unused stainless steel pipe fittings, there should be a special storage area, and the pipe fittings should be placed neatly so that the whole is evenly stressed, avoid mixing with other building materials such as cement, and have a covering to avoid sunlight. Or contact with other oils, sand and gravel.
2. After measuring, drawing lines, and comparing according to the correct operating specifications, if the pressure is not in place at one time, the second pressure can be performed, but remember to press and test the water after the installation is completed to ensure that there is no water leakage.
3. The pipe fittings in the water supply field are thin-walled, and the thinnest stainless steel pipe and pipe fittings are 0.8mm thick. Therefore, when using or handling stainless steel pipe fittings, remember to handle them with care, and do not throw or smash them, which will easily damage the surface of the pipe fittings. The chromium-rich oxide film causes the phenomenon of rusting.
4. If it is difficult to insert the pipe when connecting the stainless steel pipe and the pipe fitting, you can first consider whether the burr of the pipe is not removed when cutting, so as to prevent the burr from damaging the sealing rubber ring in the pipe fitting.
5. If stainless steel pipes and fittings are accidentally contaminated with oil or decoration chemicals at the construction site, remember to clean them in time to prevent damage to the oxide film on the surface of the pipes.